Senior Process Engineer résumé example, in the Cambridge design
Thirteen years in specialty chemicals and refining, where each improvement is stated as yield, energy or an outage avoided.
Written for United States, at senior, in the engineering field, shown in the Cambridge design. Every name, employer, address and number below is invented.
Chemical engineer with thirteen years on continuous processes in specialty chemicals and refining. Redesigned a distillation train that lifted yield 4.2 points and cut steam demand 38,000 lb/hr, paying back its
.6M cost in fourteen months. Licensed PE and the plant HAZOP facilitator since 2021.
Experience
Senior Process Engineer, Ravenwood Chemical · February 2020 – present
Technical owner of two continuous trains producing 180,000 tons a year of specialty intermediates.
Redesigned a three-column distillation train, raising yield 4.2 points and cutting steam demand 38,000 lb/hr for a fourteen-month payback on .6M.
Facilitated 19 HAZOPs and closed 240 of 261 recommendations inside the two-year PSM cycle, against 61% closure in the prior cycle.
Ended a recurring reactor fouling shutdown, taking unplanned outages from five a year to one and adding 22 production days.
Rewrote the startup procedures after a near-miss review; the next two startups ran with no flare events, against a six-event average.
Process Engineer, Tidegate Refining · January 2016 – January 2020
Owned the hydrotreater through two turnarounds, both completed on schedule and 8% under budget.
Modeled and commissioned a heat-integration project that cut fired-heater duty 11%, worth $840k a year in fuel gas.
Traced a catalyst deactivation trend to a bypassing feed filter, restoring cycle length from 9 months to 15.
Process Engineer, Ashfall Polymers · July 2013 – December 2015
Commissioned an extrusion line from water batching to on-spec product in 26 days against a 45-day plan.
Cut off-spec resin 31% by retuning melt-temperature control loops and adding a die-pressure alarm.
Education
B.S. Chemical Engineering · Louisiana State University · August 2009 – May 2013
Skills
Process design: Distillation and separations, Heat integration, Reactor troubleshooting, Hydraulics and relief sizing, Mass and energy balances
Process safety: PSM (29 CFR 1910.119), HAZOP and LOPA, Relief systems (API 520/521), Management of change, Incident investigation
Tools: Aspen Plus, Aspen HYSYS, PI ProcessBook, Minitab, Python
Certifications
Professional Engineer (Chemical), Louisiana — Louisiana Professional Engineering and Land Surveying Board
HAZOP Leadership and Facilitation — AIChE
OSHA 30-Hour General Industry — OSHA Training Institute
Why this Senior Process Engineer résumé works
The distillation redesign is written as an investment case: yield up 4.2 points, steam down 38,000 lb/hr and a “fourteen-month payback on .6M”, the language a plant manager uses to approve capital.
Process safety gets numbers too: 19 HAZOPs facilitated and 240 of 261 recommendations closed inside the two-year PSM cycle, against 61% before, which matters for any role at a PSM-covered site.
Uptime is counted in production terms, unplanned outages cut from five a year to one and 22 production days added, so reliability work reads as output rather than maintenance.
The Louisiana PE license, AIChE HAZOP facilitation training and OSHA 30-Hour General Industry sit together, matching the credentials senior process roles in refining and chemicals ask for.
Senior Process Engineer résumé: common questions
Should a process engineer resume include a PE license?
Yes, with the discipline, state and year, such as Professional Engineer (Chemical), Louisiana. It matters most for senior roles that sign off on relief systems, design changes or management of change.
What should a senior process engineer resume include?
Improvements stated as yield, energy, throughput or outages avoided, with cost and payback where known; process safety work such as HAZOPs and PSM; and simulation tools like Aspen Plus or HYSYS.
How long should a process engineer resume be?
Two pages for thirteen years across several plants. Keep each role to the units you owned and three or four results, and leave out routine duties every process engineer performs.
