# Quality Engineer résumé example

A production engineer who moved into quality, told through PPM, audit findings and the cost of poor quality removed.

![Quality Engineer résumé example — mid level, written for India, set in the Graphite design](https://cvaurum.com/img/examples/quality-engineer.webp)

- Field: Engineering
- Career stage: Mid level
- Written for: India
- Design: Graphite (https://cvaurum.com/templates/graphite)
- Open it: https://cvaurum.com/examples/quality-engineer

Every name, employer, address, phone number and figure below is invented.

---

## Divya Sundaresan — Senior Quality Engineer

Quality engineer with seven years in automotive castings and machined components, the first two of them supervising production. Took customer PPM at a Tier-1 machining plant from 840 to 96 in two years and closed a warranty claim that had been open since 2022. ASQ-certified quality engineer and IATF 16949 internal auditor.

### Experience

**Senior Quality Engineer**, Velmora Auto Components · July 2023 – present

Customer quality for two machining lines shipping 2.4 million parts a year to three passenger-vehicle OEMs.

- Reduced customer PPM from 840 to 96 over two years by moving four inspection gates upstream and adding in-process bore gauging.
- Closed a warranty claim open since 2022 through an 8D that traced the leak path to a deburring step, ending ₹62 lakh of annual debit notes.
- Carried the plant through IATF 16949 recertification with two minor findings and no majors, against eleven findings at the previous audit.
- Cut cost of poor quality from 2.1% to 0.9% of sales by putting containment spend on the daily plant review board.

**Quality Engineer**, Riyansh Precision Castings · April 2021 – June 2023

- Rebuilt the incoming inspection plan around risk-ranked characteristics, cutting inspection hours 38% while catching three defect modes that had previously reached assembly.
- Ran 23 supplier audits across nine foundries and lifted on-time PPAP submission from 54% to 91%.
- Introduced Gage R&R across 40 instruments; nine measured above 30% variation and were replaced or recalibrated.

**Production Engineer**, Thendral Metalworks · July 2019 – March 2021

- Supervised a 34-operator machining shift and raised schedule adherence from 78% to 94%.
- Cut setup rejections on a CNC turning cell 62% by introducing first-article checks at every shift change.

### Education

- B.E. Mechanical Engineering · PSG College of Technology, Anna University · August 2015 – May 2019

### Skills

- **Quality systems**: IATF 16949, ISO 9001, APQP, PPAP, PFMEA, Control plans, MSA
- **Problem solving**: 8D, Why-why analysis, Fishbone, Poka-yoke, Layered process audits
- **Measurement**: CMM programming, Gage R&R, SPC, Minitab, Surface roughness testing, Leak testing